Sunday, September 08, 2013

Northgate Omnikey Evolution Cord Replacement

I have ended up rescuing items from the trash far too often this summer. Honestly I’m slightly embarrassed and worried I’m becoming a contemporary high-tech rag-and-bone man. That said if people are going to throw away keyboards that still fetch close to $100 on Ebay, then I shall be upending myself in trashcans forever.

DSCF1348
The keyboard. As you can see it has issues in the cord area. I’m not going to go on and on about mechanical keyboards the way some people endlessly do, but they are neat things.

DSCF1349
Northgate is no longer with us.

DSCF1353
I needed a PS/2 cable and this keyboard was a perfect donor.

DSCF1354
Good for learning touch typing, but not much else. It’s worth noting that the lettering on the Northgate won’t rub off because it’s part of the molding of the key.

DSCF1356
The existing cord was the old AT style. It is extremely easy to convert AT to PS/2.

DSCF1359
The circuit board in the donor keyboard. The wires were labeled but I double checked anyway. (Voltage, Clock, Data, Ground, with Drain being another ground)

DSCF1362
1995. So it’s only 18 years old.

DSCF1364
Removing the top is done by removing screws coming through the bottom. No point giving a step-by-step.

DSCF1366
What is interesting is that the cord and buttons for the optional trackpad are in place. This means that the cord that is attached was original but at some point was flayed and separated from the cord for the trackpad, possibly because it didn’t have a trackpad and it was in the way? Or people are crazy.

DSCF1368
The place where the wiring attaches to the keyboard. To remove the keyboard PCB from the bottom of the case those screws on the side were removed. Note the missing Atmega IC in the space between the two green LEDs, if it was there then this would have been one of the programmable keyboards. Although people remove them because the programmability was only using software that ran in Windows 98. Or something like that, bored yet?

DSCF1370
This is a really exciting picture.

DSCF1371
As is this one. It was mainly for reference.

DSCF1374
Hooked up for testing.

DSCF1375
Yes, that’s an old Gateway 2000 P4D-66 running Windows For Workgroups 3.11, with Word 2.1 open…

DSCF1380
All hooked up correctly. In order from left to right is Ground, VCC, Data and Clock. You can see the area of missing Atmega chip clearly in this picture.

DSCF1388
After testing I gooped the cable with hot glue. The original was gooped down instead of mechanical strain relief, or in addition to.

So now I have a nice old keyboard. Honestly I hate ergonomic keyboards so I’ll either sell it or hold onto it for the computer museum.

Some helpful Northgate links:

1 comment:

Anonymous said...

I have new original Evolution cables in stock.
northgate-keyboard-repair.com